Make Home|Add to Favorites
 
 
Solisearch.net » Applications » AllData 10.53 Install Disc-INT

AllData 10.53 Install Disc-INT

AllData 10.53 Install Disc-INT | 190.41 MB

The software package AllData 10.53, contains a detailed description of repair and maintenance for cars as American-made cars and the Asian and European production produced for the American market. AllData 10.53 will help to repair not only American cars, but will allow renovate and European and Asian foreign cars, as many nodes in the cars are identical, despite the assembly for different markets. The program provides detailed information on repair, which describes the device features separate mechanisms, standards of various parameters (volumes of refueling capacities, wheel alignment, etc.) Used diagnostic and repair equipment and special tools, the description of works on assembly, disassembly, adjustment, repair and diagnostic information about the location of components and tools and so on. The program AllData 10.53, you can not only repair, but also deal with fault diagnosis of electronic components of the vehicle. To do this, for you have the following information: location of the diagnostic connector, detailed breakdowns of the table of fault codes with possible causes of failure, symptoms, and sequence of tests to troubleshoot the problem, description of contents readable blocks of current parameters with an indication of normative values, work with channel adaptation, etc

"AllData 10.53 Install Disc-INT"

HI-SPEED DOWNLOAD
Free 300 GB with Full DSL-Broadband Speed!



AllData 10.53 Install Disc-INT

AllData 10.53 Install Disc-INT | 190.41 MB

The software package AllData 10.53, contains a detailed description of repair and maintenance for cars as American-made cars and the Asian and European production produced for the American market. AllData 10.53 will help to repair not only American cars, but will allow renovate and European and Asian foreign cars, as many nodes in the cars are identical, despite the assembly for different markets. The program provides detailed information on repair, which describes the device features separate mechanisms, standards of various parameters (volumes of refueling capacities, wheel alignment, etc.) Used diagnostic and repair equipment and special tools, the description of works on assembly, disassembly, adjustment, repair and diagnostic information about the location of components and tools and so on. The program AllData 10.53, you can not only repair, but also deal with fault diagnosis of electronic components of the vehicle. To do this, for you have the following information: location of the diagnostic connector, detailed breakdowns of the table of fault codes with possible causes of failure, symptoms, and sequence of tests to troubleshoot the problem, description of contents readable blocks of current parameters with an indication of normative values, work with channel adaptation, etc
*** Uploader Notes ***
Unfortunately, according to the manufacturer's website, this will be the last version, distributed on disks. All subsequent versions of the program will be online

Before installing add these lines to your hosts:
127.0.0.1 marcomm.alldata.com #ALLDATA
127.0.0.1 169.198.203.194 #ALLDATA
127.0.0.1 198.71.66.53 #FLEXNET
127.0.0.1 64.14.29.251 #FLEXNET
127.0.0.1 199.7.48.190 #FLEXNET
Place all disk images in a single folder on the hard disk (eg. AllData.10.53);
Before installing, carefully review the installation instructions! Turn off the Internet, or use a firewall to block any attempts to access!
1. Burn to disc or mount a virtual drive image from the archive AFW_10530813.iso
2. Run setup.exe and install the software. (The message "Missing key" - just ignore ...)
3. After installation is complete, copy the file from the folder Ace.exe "AllData 10.52 3Q12" in the installation folder (yes, the program will then say that her version 10.52, but nevertheless with the data version 10.53 it will work)
4. Use a firewall to block any attempts to access the program online! (However, I have no firewall running and apparently quite correct hosts)

Connecting data discs
1. Unpack ISO images (each way - in a separate folder!). This can be done, for example, using 7zip
2. In choosing the menu Data - Devices, click the button Connect, select the drive and enter the name of the folder hands
3. Depending on the mood and free time or repeat described in claim 2 for each folder (there are 90 pieces), or open the file c: /alldataw/ace.ini (the default installation path if you installed the program to a different location, look for the file there) and copy-paste the existing line and then edit the number of devices and folder names
AllData 10.53 Install Disc-INT

(All below links are interchangable. No password)
Buy Premium To Support Me & Get Resumable Support & Max Speed


P A S S W O R D    P R O T E C T E D ! 
PASSWORD WILL BE PUBLISHED HERE TOMORROW!
 PLEASE ADD PAGE TO YOUR FAVORITS

Free 300 GB with 10 GB High-Speed(No Password BACKUP)


Hide Your IP & Protect Your Privacy!
Get Your 15 Day Free Trial Now.


Tags: AllData, Install, Disc

AllData 10.53 Install Disc-INT Fast Download via Rapidshare Upload Filehosting Megaupload, AllData 10.53 Install Disc-INT Torrents and Emule Download or anything related.
Information
Comment on the news site is possible only within (days) days from the date of publication.